Items where Author is "AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI"

Group by: Item Type | No Grouping

Jump to: Article | Conference or Workshop Item

Number of items: 65.

Article

Dr. Ir. I Ketut Gede Wirawan, MT, I KETUT GEDE WIRAWAN and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Ketut Astawa, ST, MT, KETUT ASTAWA and Dr. Wayan Nata Septiadi, ST, MT, WAYAN NATA SEPTIADI (2019) CHARACTERISTICS OF BIODIESEL FROM WASTE COOKING OIL. International Journal of Mechanical Engineering and Technology (IJMET), 10 (9). ISSN 0976-6359

AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI (2019) The engine performance characteristics of an IDI diesel engine fueled by soybean oil methyl esters. Journal of Engineering and Scientific Research, 1 (1). ISSN 2685-1695

Dr. Ir. I Ketut Gede Wirawan, MT, I KETUT GEDE WIRAWAN and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Dr. Wayan Nata Septiadi, ST, MT, WAYAN NATA SEPTIADI (2019) THE EFFECT OF BIODIESEL-DIESEL FUEL BLENDING ON EXHAUST GAS EMISSIONS. International Journal of Mechanical Engineering and Technology (IJMET), 10 (2). ISSN 0976-6359

Dr. Ir. I Ketut Gede Wirawan, MT, I KETUT GEDE WIRAWAN and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Dr. Wayan Nata Septiadi, ST, MT, WAYAN NATA SEPTIADI (2018) Distribusi Ukuran Droplet Bahan Bakar Minyak Jelantah Sepanjang Region Semburan Nosel Seberhana. Mechanical, 9 (1). ISSN 2087 1880

Dr. Ir. I Ketut Gede Wirawan, MT, I KETUT GEDE WIRAWAN and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Dr. Wayan Nata Septiadi, ST, MT, WAYAN NATA SEPTIADI (2017) Effect of Pressure and Preheating Temperature on Droplet Measure of Waste Cooking Oil. International Journal of Engineering and Technology (IJET), 9 (4). ISSN 0975-4024

AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and SI PUTU GEDE GUNAWAN TISTA, ST, MT, SI PUTU GEDE GUNAWAN TISTA (2017) Karakteristik Campuran Solar dan Hasil Daur Ulang Oli Bekas sebagai Bahan Bakar Mesin Diesel. Jurnal Mechanical, 8 (2). ISSN 2460-1888

Ir. Hendra Wijaksana, M.Sc, HENDRA WIJAKSANA and Prof. I Nyoman Suprapta Winaya, ST,MA.Sc., Ph.D., I NYOMAN SUPRAPTA WINAYA and Dr.Eng. Made Sucipta, ST, MT, Made Sucipta and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Ketut Astawa, ST, MT, KETUT ASTAWA (2017) Performance study of air tunneled evaporative cooling pad in minimizing broiler heat stress level and supporting local food security program. journal of built environment, technology and engineering, 3 (-). ISSN 0128-1003

Dr. Ir. I Ketut Gede Wirawan, MT, I KETUT GEDE WIRAWAN and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI (2017) ANALISIS VARIASI LUASAN PREHEATING BERBENTUK SPIRAL TERHADAP SUDUT SEMBURAN MINYAK JELANTAH. Teknik Desain Mekanika, 6 (2). ISSN 2302 –5182

Dr. Ir. I Ketut Gede Wirawan, MT, I KETUT GEDE WIRAWAN and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI (2017) Studi Eksperimental Pengaruh Variasi Tekanan Terhadap Sudut Semburan Minyak Jelantah. Teknik Desain Mekanika, 6 (2). ISSN ISSN 2302 –5182

Ir. Hendra Wijaksana, M.Sc, HENDRA WIJAKSANA and Prof. I Nyoman Suprapta Winaya, ST,MA.Sc., Ph.D., I NYOMAN SUPRAPTA WINAYA and Dr.Eng. Made Sucipta, ST, MT, Made Sucipta and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Ketut Astawa, ST, MT, KETUT ASTAWA (2017) Performance study of air tunneled evaporative cooling pad in minimizing broilers heat stress level and supporting local food security program. journal of built environment, technology and engineering, 3 (-). ISSN 0128 - 1003

Dr. Ir. I Ketut Gede Wirawan, MT, I KETUT GEDE WIRAWAN and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Dr. Wayan Nata Septiadi, ST, MT, WAYAN NATA SEPTIADI and I GUSTI KETUT SUKADANA, ST, MT, I GUSTI KETUT SUKADANA (2017) Spray Angle Evaluations of Waste Cooking Oil on the Simple Nozzle Tip. Advances in Renewable Energy Technology, 1 (1). ISSN 2550-1291

Ir. MADE SUARDA, M.Eng., MADE SUARDA and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Dr.Eng. Made Sucipta, ST, MT, Made Sucipta and Ir. I Nengah Suweden, MT, I NENGAH SUWEDEN (2017) Kajian eksperimental head losses katup limbah pompa hydram. Jurnal Energi Dan Manufaktur (JEM), 10 (2). ISSN 2302 - 5255

AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and SI PUTU GEDE GUNAWAN TISTA, ST, MT, SI PUTU GEDE GUNAWAN TISTA (2016) Pengujian orifice flow meter dengan kapasitas aliran rendah. Jurnal Mechanical, 7 (2). ISSN 2460-1888

SI PUTU GEDE GUNAWAN TISTA, ST, MT, SI PUTU GEDE GUNAWAN TISTA and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI (2016) Pengaruh Variasi Diameter O-ring pada Permukaan Silinder terhadap Koefisien Drag. Jurnal Teknik Mesin, 25 (2). ISSN 0852-6095

AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Dr. Wayan Nata Septiadi, ST, MT, WAYAN NATA SEPTIADI (2016) ANALISA UNJUK KERJA BAHAN BAKAR HASIL PENGOLAHAN OLI BEKAS PADA MOTOR DIESEL. JURNAL METTEK, 2 (1). ISSN 2502-3829

SI PUTU GEDE GUNAWAN TISTA, ST, MT, SI PUTU GEDE GUNAWAN TISTA and I MADE ASTIKA, ST, M.Erg, MT, I MADE ASTIKA and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI (2016) Pengaruh variasi jarak antar ring berbentuk segi empat pada permukaan silinder terhadap koefisien drag. Jurnal Energi Dan Manufaktur (JEM), 9 (1). ISSN 2302 –5255

AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and I WAYAN WIDHIADA, ST., M.Sc, Ph.D, I WAYAN WIDHIADA (2016) Studi eksperimental pengaruh variasi posisi penyemprotan dan jarak nosel terhadap waktu pemadaman sistem pemadaman kabut air. Juenal METTEK, 2 (1). ISSN 2502-3829

SI PUTU GEDE GUNAWAN TISTA, ST, MT, SI PUTU GEDE GUNAWAN TISTA and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Ir. Hendra Wijaksana, M.Sc, HENDRA WIJAKSANA (2015) The influence of distance variation between rings with sloping position on cylinder surface to drag coefficient. Applied Mechanical and Materials, 776 (384). ISSN cd 1660-9336

AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Dr. Wayan Nata Septiadi, ST, MT, WAYAN NATA SEPTIADI (2015) Daur Ulang Oli Bekas Menjadi Bahan Bakar Diesel dengan Proses Pemurnian Menggunakan Media Asam Sulfat dan Natrium Hidroksida. Juenal METTEK, 1 (2). ISSN 2502-3829

AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Ketut Astawa, ST, MT, KETUT ASTAWA (2015) Performansi Sepeda Motor Empat Langkah Menggunakan Bahan Bakar dengan Angka Oktan Lebih Rendah dari Yang Direkomendasikan. Jurnal Energi Dan Manufaktur (JEM), 8 (2). ISSN 2302-5255

AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI (2012) The effect of injection pressure and fuel viscosity on the spray characteristics of biodiesel blends injected into an atmospheric chamber. Journal of Mechanical Science and Technology (JMST), 26 (9). ISSN 1738-494X

AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI (2011) Qualitative and quantitative analysis of spray characteristics of diesel and biodiesel blend on common-rail injection system. Journal of Mechanical Science and Technology (JMST), 25 (4). ISSN 1738-494X

Conference or Workshop Item

AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI (2019) Experimental study on combustion characteristics of an indirect injection diesel engine fuelled by biodiesel blends. In: UNSPECIFIED.

Ir. Hendra Wijaksana, M.Sc, HENDRA WIJAKSANA and Prof. I Nyoman Suprapta Winaya, ST,MA.Sc., Ph.D., I NYOMAN SUPRAPTA WINAYA and Dr.Eng. Made Sucipta, ST, MT, Made Sucipta and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI (2019) STUDY POTENCY OF DEHUMIDIFIER COIL BASED INTERNAL COOLING FOR NANOPORE BAMBOO SEMI INDIRECT EVAPORATIVE COOLING. In: UNSPECIFIED.

AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and Dr. Ir. I Ketut Gede Sugita, MT, I KETUT GEDE SUGITA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2019) Analysis of daily driving and its impact to the fuel economy of plug-in hybrid electric vehicles. In: UNSPECIFIED.

I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Dr. Ir. I Ketut Gede Sugita, MT, I KETUT GEDE SUGITA (2019) Analysis on fuel economy and CO2 emission of gasoline engine and hybrid electric vehicles. In: UNSPECIFIED.

Dr. Ir. I Ketut Gede Wirawan, MT, I KETUT GEDE WIRAWAN and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Ketut Astawa, ST, MT, KETUT ASTAWA and I MADE ASTIKA, ST, M.Erg, MT, I MADE ASTIKA (2019) CHARACTERISTICS OF PREHEATING BIODIESEL. In: UNSPECIFIED.

Dr. Ir. I Ketut Gede Wirawan, MT, I KETUT GEDE WIRAWAN and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Ketut Astawa, ST, MT, KETUT ASTAWA (2019) STUDI EKSPERIMENTAL KARAKTERISTIK UKURAN DROPLET PADA BAHAN BAKAR CAMPURAN BIODIESEL - ETHANOL. In: UNSPECIFIED.

Ir. MADE SUARDA, M.Eng., MADE SUARDA and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Dr.Eng. Made Sucipta, ST, MT, Made Sucipta (2019) Experimental Study of the Effects of Transmission Pipe Diameter on Water Hammer Pressure in Centrifugal Pump Systems. In: UNSPECIFIED.

Ir. MADE SUARDA, M.Eng., MADE SUARDA and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Dr.Eng. Made Sucipta, ST, MT, Made Sucipta and Prof. Ir. I Gusti Bagus Wijaya Kusuma, Ph.D., I GUSTI BAGUS WIJAYA KUSUMA (2018) Investigation on Characterization of Waste Valve to Optimize the Hydraulic Ram Pump Performance. In: UNSPECIFIED.

Dr. Ir. I Ketut Gede Wirawan, MT, I KETUT GEDE WIRAWAN and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI (2018) Pengaruh penambahan zat aditiff pada biodiesel terhadap emisi gas buang dan specific fuel consumption. In: UNSPECIFIED.

AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Ir. I Dewa Gede Putra Swastika, M.Erg, I DEWA GEDE PUTRA SWASTIKA (2018) Rancangan penelitian airblast atomizer untuk kompor pembakaran mayat. In: UNSPECIFIED.

Ir. Hendra Wijaksana, M.Sc, HENDRA WIJAKSANA and Prof. I Nyoman Suprapta Winaya, ST,MA.Sc., Ph.D., I NYOMAN SUPRAPTA WINAYA and Dr.Eng. Made Sucipta, ST, MT, Made Sucipta and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Ir. I Nengah Suarnadwipa, MT, I NENGAH SUARNADWIPA (2018) THE INVESTIGATION ON COOLING CAPACITY AND CELdek MATERIAL PAD CLASSIFICATION OF EVAPORATIVE COOLING PAD SYSTEM USING DIFFERENT PAD MATERIAL WITH WATER TEMPERATURE AND WATER DISCHARGE VARIATIONS. In: UNSPECIFIED.

Ir. MADE SUARDA, M.Eng., MADE SUARDA and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI (2018) VISUALISASI POLA ALIRAN AIR DI SEKITAR KATUP LIMBAH POMPA HIDRAM DENGAN VARIASI DIAMETER LUBANG KATUP LIMBAH. In: UNSPECIFIED.

Ir. Hendra Wijaksana, M.Sc, HENDRA WIJAKSANA and Prof. I Nyoman Suprapta Winaya, ST,MA.Sc., Ph.D., I NYOMAN SUPRAPTA WINAYA and Dr.Eng. Made Sucipta, ST, MT, Made Sucipta and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI (2018) The investigation of influence ammonia concentration variations to the performance of a pump less ammonia-water absorption refrigeration system with water flooding evaporator. In: UNSPECIFIED.

Ir. Hendra Wijaksana, M.Sc, HENDRA WIJAKSANA and Prof. I Nyoman Suprapta Winaya, ST,MA.Sc., Ph.D., I NYOMAN SUPRAPTA WINAYA and Dr.Eng. Made Sucipta, ST, MT, Made Sucipta and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI (2018) An overview of different indirect and semi-indirect evaporative cooling system for study potency of skinless bamboo as an evaporative cooling new porous material. In: UNSPECIFIED.

AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and I MADE ASTIKA, ST, M.Erg, MT, I MADE ASTIKA (2018) Analisi Pembakaran campuran Bensin dan Octane Booster pada mesin bnsin empat langkah. In: UNSPECIFIED.

Dr. Ir. I Ketut Gede Wirawan, MT, I KETUT GEDE WIRAWAN and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Dr. Wayan Nata Septiadi, ST, MT, WAYAN NATA SEPTIADI (2018) CHARACTERISTICS OF BIODIESEL FROM WASTE COOKING OIL. In: UNSPECIFIED.

Ir. MADE SUARDA, M.Eng., MADE SUARDA and Prof. Ir. I Gusti Bagus Wijaya Kusuma, Ph.D., I GUSTI BAGUS WIJAYA KUSUMA and Dr.Eng. Made Sucipta, ST, MT, Made Sucipta and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI (2018) Experimental Study on Orifice Reducer of Delivery Valve in Hydraulic Ram. In: UNSPECIFIED.

Ir. MADE SUARDA, M.Eng., MADE SUARDA and Prof. Ir. I Gusti Bagus Wijaya Kusuma, Ph.D., I GUSTI BAGUS WIJAYA KUSUMA and Dr.Eng. Made Sucipta, ST, MT, Made Sucipta and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI (2018) Investigation of Lifting Force of Delivery Valve and Increased Pressure in Air Chamber of Hydram Pump. In: UNSPECIFIED.

Dr. Ir. I Ketut Gede Wirawan, MT, I KETUT GEDE WIRAWAN and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Dr. Wayan Nata Septiadi, ST, MT, WAYAN NATA SEPTIADI (2018) PENGARUH PENCAMPURAN BIODIESEL-MINYAK DIESEL TERHADAP EMISI GAS BUANG. In: UNSPECIFIED.

Ir. MADE SUARDA, M.Eng., MADE SUARDA and Prof. Ir. I Gusti Bagus Wijaya Kusuma, Ph.D., I GUSTI BAGUS WIJAYA KUSUMA and Dr.Eng. Made Sucipta, ST, MT, Made Sucipta and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI (2018) Study on Reducer Ratio of Delivery Valve Body of a Hydraulic Ram Performance. In: UNSPECIFIED.

Ir. I Dewa Gede Putra Swastika, M.Erg, I DEWA GEDE PUTRA SWASTIKA and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI (2018) THE EVOLUTION OF WATER SPRAY ON AIRBLAST ATOMIZER. In: UNSPECIFIED.

Ir. MADE SUARDA, M.Eng., MADE SUARDA and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Dr.Eng. Made Sucipta, ST, MT, Made Sucipta and Ir. I Nengah Suweden, MT, I NENGAH SUWEDEN (2017) Kajian Eksperimental Head Losses Katup Limbah Pompa Hydram. In: UNSPECIFIED.

Dr. Ir. I Ketut Gede Wirawan, MT, I KETUT GEDE WIRAWAN and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Dr. Wayan Nata Septiadi, ST, MT, WAYAN NATA SEPTIADI (2017) Pengaruh Tekanan dan Temperatur Terhadap Ukuran Rata-Rata Droplet Minyak Jelantah. In: UNSPECIFIED.

AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Ir. Hendra Wijaksana, M.Sc, HENDRA WIJAKSANA (2017) Perpindahan panas konveksi pada permukaan penghantar panas bersirip berbentuk setengah lingkaran. In: UNSPECIFIED.

Ir. MADE SUARDA, M.Eng., MADE SUARDA and Prof. Ir. I Gusti Bagus Wijaya Kusuma, Ph.D., I GUSTI BAGUS WIJAYA KUSUMA and Dr.Eng. Made Sucipta, ST, MT, Made Sucipta and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI (2017) VISUALIZATION OF WATER FLOW PHENOMENON IN HYDRAULIC RAM PUMP WORKING CYCLE BY DIFFERENT COLORS DYES INJECTION. In: UNSPECIFIED.

Ir. MADE SUARDA, M.Eng., MADE SUARDA and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Ir. I Nengah Suweden, MT, I NENGAH SUWEDEN and Dr.Eng. Made Sucipta, ST, MT, Made Sucipta (2017) Investigation of The Optimum Waste-Valve Mass of Hydraulic Ram Pump. In: UNSPECIFIED.

AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and SI PUTU GEDE GUNAWAN TISTA, ST, MT, SI PUTU GEDE GUNAWAN TISTA (2017) Pembuatan alur berbentuk U pada permukaan silinder untuk mengurangi drag. In: UNSPECIFIED.

Ir. I Dewa Gede Putra Swastika, M.Erg, I DEWA GEDE PUTRA SWASTIKA and Ir. Anak Agung Adhi Suryawan, MT, ANAK AGUNG ADHI SURYAWAN and Dr. Ir. I Ketut Gede Wirawan, MT, I KETUT GEDE WIRAWAN and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI (2017) Preheating pada kompor pembakaran mayat. In: UNSPECIFIED.

AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Dr. Ir. I Ketut Gede Wirawan, MT, I KETUT GEDE WIRAWAN (2017) Analisis Pembakaran Mesin Sepeda Motor dengan rasio kompresi dan bahan bakar berbeda. In: UNSPECIFIED.

Ir. MADE SUARDA, M.Eng., MADE SUARDA and Dr.Eng. Made Sucipta, ST, MT, Made Sucipta and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Prof. Ir. I Gusti Bagus Wijaya Kusuma, Ph.D., I GUSTI BAGUS WIJAYA KUSUMA (2017) INVESTIGATION ON CHARACTERIZATION OF WASTE VALVE TO OPTIMIZE THE HYDRAULIC RAM PUMP PERFORMANCE. In: UNSPECIFIED.

Ir. Hendra Wijaksana, M.Sc, HENDRA WIJAKSANA and Prof. I Nyoman Suprapta Winaya, ST,MA.Sc., Ph.D., I NYOMAN SUPRAPTA WINAYA and Dr.Eng. Made Sucipta, ST, MT, Made Sucipta and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Ketut Astawa, ST, MT, KETUT ASTAWA (2017) Performance study of air tunneled evaporative cooling pad in minimizing broilers heat stress level and supporting local food security program. In: UNSPECIFIED.

Ir. Hendra Wijaksana, M.Sc, HENDRA WIJAKSANA and Prof. I Nyoman Suprapta Winaya, ST,MA.Sc., Ph.D., I NYOMAN SUPRAPTA WINAYA and Dr.Eng. Made Sucipta, ST, MT, Made Sucipta and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Ir. I Nengah Suarnadwipa, MT, I NENGAH SUARNADWIPA (2017) The investigation of cooling capacity and CELdek material pad classification of evaporative cooling pad system using different pad material with water temperature and water discharge variations. In: UNSPECIFIED.

Ir. MADE SUARDA, M.Eng., MADE SUARDA and Prof. Ir. I Gusti Bagus Wijaya Kusuma, Ph.D., I GUSTI BAGUS WIJAYA KUSUMA and Dr.Eng. Made Sucipta, ST, MT, Made Sucipta and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI (2017) VISUALIZATION OF WATER FLOW PHENOMENON IN HYDRAULIC RAM PUMP WORKING CYCLE BY DIFFERENT COLORS DYES INJECTION. In: UNSPECIFIED.

Dr. Ir. I Ketut Gede Wirawan, MT, I KETUT GEDE WIRAWAN and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI (2016) Analisa Sudut Sebaran Minyak Kelapa Di Ujung Nosel Menggunakan Pemanas Awal Tipe Coil. In: UNSPECIFIED.

Dr. Ir. I Ketut Gede Wirawan, MT, I KETUT GEDE WIRAWAN and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI (2016) Analisis Sudut Sebaran Minyak Kelapa di Ujung Nosel Menggunakan Pemanas Awal Tipe Coil. In: UNSPECIFIED.

AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Dr. Wayan Nata Septiadi, ST, MT, WAYAN NATA SEPTIADI (2016) Karakteristik bahan bakar hasil daur ulang oli bekas. In: UNSPECIFIED.

AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Dr. Wayan Nata Septiadi, ST, MT, WAYAN NATA SEPTIADI and SI PUTU GEDE GUNAWAN TISTA, ST, MT, SI PUTU GEDE GUNAWAN TISTA (2016) Karakteristik Campuran Solar dan Hasil Daur Ulang Oli Bekas sebagai Bahan Bakar Mesin Diesel. In: UNSPECIFIED.

AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Ketut Astawa, ST, MT, KETUT ASTAWA (2016) Kondisi Busi Sepeda Motor Empat Langkah Menggunakan Bahan Bakar dengan Angka Oktan Lebih Rendah dari Lebih Rendah dari Yang Direkomendasikan. In: UNSPECIFIED.

Dr. Ir. I Ketut Gede Wirawan, MT, I KETUT GEDE WIRAWAN and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and I Gede Putu Agus Suryawan, ST, MT, I GEDE PUTU AGUS SURYAWAN (2016) PEMBENTUKAN API CELLULAR PADA PEMBAKARAN PREMIXED MINYAK KELAPA. In: UNSPECIFIED.

Ir. MADE SUARDA, M.Eng., MADE SUARDA and Ir. Anak Agung Adhi Suryawan, MT, ANAK AGUNG ADHI SURYAWAN and Ir. I Nengah Suweden, MT, I NENGAH SUWEDEN and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI (2016) Simulation of Fluid Flow Phenomenon Through a Plate and Spherical Shaped Delivery Valve of Hydraulic Ram Pump. In: UNSPECIFIED.

I GUSTI NGURAH PUTU TENAYA, ST., MT., I GUSTI NGURAH PUTU TENAYA and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI (2015) Karakteristik Pendinginan Evaporatif Menggunakan Cooling Pads. In: UNSPECIFIED.

This list was generated on Sat Apr 27 03:47:37 2024 WITA.

Export as	Atom RSS 1.0 RSS 2.0