Items where Author is "I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA"

Article

I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and Dr. Dewa Ngakan Ketut Putra Negara, ST., M.Sc., Dewa Ngakan Ketut Putra Negara and I Dewa Made Krishna Muku, ST., MT., I DEWA MADE KRISHNA MUKU (2018) Rancang Bangun Alat Pemotong Pengiris Bahan Baku Krupuk Terigu dan Kripik Singkong. Buletin Udayana Mengabdi, 17 (1). ISSN 1412 0925

I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and Dr. I Made Parwata, ST, MT, I MADE PARWATA and Dr. Dewa Ngakan Ketut Putra Negara, ST., M.Sc., Dewa Ngakan Ketut Putra Negara (2017) KAPASITAS PRODUKSI MESIN PENYARING LULUH BAHAN BAKU BATA ASAB (BATA MERAH GOSOK) DENGAN 3 SUDU-PENGADUK-SEJAJAR. Buletin Udayana Mengabdi, 16 (3). ISSN 1412-0925

I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and Dr. I Made Parwata, ST, MT, I MADE PARWATA and I Putu Lokantara, ST, MT, I PUTU LOKANTARA (2017) Wear of NiCr coating deposited on medium carbon steel with powder flame spray coating method. JOURNAL OF MATERIAL ENGINEERING AND PROCESSING TECHNOLOGY (JMEPT), 1 (2). ISSN 2549-6891

I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and Dr. I Made Parwata, ST, MT, I MADE PARWATA and I Putu Lokantara, ST, MT, I PUTU LOKANTARA (2017) Karakteristik kekerasan material dibawah permukaan akibat pemanasan-awal substrate dalam proses thermal coating. JURNAL METTEK, 3 (1). ISSN 2502-3829

I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and Dr. I Made Parwata, ST, MT, I MADE PARWATA (2016) Kapasitas produksi bubur kedelai bahan baku tahu dengan variasi debit air proses penggilingan. journal Udayana Mengabdi, 15 (2). ISSN 1412-0925

I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and Dr. I Made Parwata, ST, MT, I MADE PARWATA and Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and I Putu Lokantara, ST, MT, I PUTU LOKANTARA (2015) Mekanisme Aus Baja Karbon AISI 1065 pada Permukaan Kontak Basah Akibat Beban Kontak Gelinding-Luncur. Jurnal Energi Dan Manufaktur (JEM), 8 (1). ISSN 2302 – 5255

I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and Dr. I Made Parwata, ST, MT, I MADE PARWATA and Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and I Putu Lokantara, ST, MT, I PUTU LOKANTARA (2015) Mekanisme aus baja karbon AISI 1065 pada permukaan kontak basah akibat beban kontak gelinding-luncur. Jurnal Energi Dan Manufaktur (JEM), 8 (1). ISSN 2302-5255

I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and Prof. Dr. Tjokorda Gde Tirta Nindhia, ST, MT, TJOKORDA GDE TIRTA NINDHIA (2015) Wear of Carbon Steel (0.65C) in Rolling-Sliding Contact with Creep Ratio. Applied Mechanics and Materials, 776 (-). ISSN 1662-7482

I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and Dr. I Made Parwata, ST, MT, I MADE PARWATA and I Putu Lokantara, ST, MT, I PUTU LOKANTARA (2015) Kekasaran Permukaan Baja Karbon Sedang Akibat Proses Sand- Blasting dengan Variasi Jarak Nosel. Jurnal Energi Dan Manufaktur (JEM), 8 (2). ISSN 2302 – 5255

I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA (2011) Simulasi Perubahan Prilaku Regangan Geser Material Rel Pada Perubahan Suhu Permukaan Kontak Akibat Beban Gelinding-Gesek. Jurnal Energi Dan Manufaktur (JEM), 5 (1). ISSN 2302-5255

I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA (2008) Modelling thermal effects in ratcheting-led wear and rolling contact fatigue. wear, 265 (9-10). ISSN 0043-1648

Dr. I Made Parwata, ST, MT, I MADE PARWATA and I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA (2015) MENGURANGI LAJU KEAUSAN RODA DAN REL KERETA API DENGAN PELAPISAN.

Conference or Workshop Item

I WAYAN WIDHIADA, ST., M.Sc, Ph.D, I WAYAN WIDHIADA and Prof. Dr. Tjokorda Gde Tirta Nindhia, ST, MT, TJOKORDA GDE TIRTA NINDHIA and I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA (2020) Control of Bionic Robot Leg Performance with Proportional Integral and Derivative Controller. In: UNSPECIFIED.

I WAYAN WIDHIADA, ST., M.Sc, Ph.D, I WAYAN WIDHIADA and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA (2019) Comparison of PID and fuzzy logic to control the motions of robotic prosthetic limbs. In: UNSPECIFIED.

I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and Dr. I Made Parwata, ST, MT, I MADE PARWATA and I Putu Lokantara, ST, MT, I PUTU LOKANTARA (2019) Kekerasan Permukaan Lapisan NiCr pada Variasi Suhu Permukaan. In: UNSPECIFIED.

I WAYAN WIDHIADA, ST., M.Sc, Ph.D, I WAYAN WIDHIADA and I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and NYOMAN PRAMAITA, ST, MT, PhD, NYOMAN PRAMAITA (2019) Perancangan Sistem Kontrol PIDpadaPrototypeKaki Bionik BerbasisMatlab/Simulink. In: UNSPECIFIED.

I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and Dr. I Made Parwata, ST, MT, I MADE PARWATA and I Putu Lokantara, ST, MT, I PUTU LOKANTARA (2019) Wear of nickel-tungsten layer on carbon steel with varying contact surface temperature. In: UNSPECIFIED.

I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and Dr. I Made Parwata, ST, MT, I MADE PARWATA and I Putu Lokantara, ST, MT, I PUTU LOKANTARA (2019) Effect of Contact Surface Temperature on Wear of Nickel-Chromium Layer. In: UNSPECIFIED.

Dr. Dewa Ngakan Ketut Putra Negara, ST., M.Sc., Dewa Ngakan Ketut Putra Negara and I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA (2019) The study on mechanical properties of pack carburized low carbon steel using BaCO3 as energizer. In: UNSPECIFIED.

AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and Dr. Ir. I Ketut Gede Sugita, MT, I KETUT GEDE SUGITA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2019) Analysis of daily driving and its impact to the fuel economy of plug-in hybrid electric vehicles. In: UNSPECIFIED.

I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Dr. Ir. I Ketut Gede Sugita, MT, I KETUT GEDE SUGITA (2019) Analysis on fuel economy and CO2 emission of gasoline engine and hybrid electric vehicles. In: UNSPECIFIED.

I WAYAN WIDHIADA, ST., M.Sc, Ph.D, I WAYAN WIDHIADA and I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA (2019) The Stability Motion Control for The BionicRobot Leg Based on PID Controller. In: UNSPECIFIED.

Dr. I Ketut Adi Atmika, ST., MT., I Ketut Adi Atmika and I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA (2018) ANALISIS KARAKTERISTIK TRAKSI DAN KINERJA TRANSMISI MODIFIKASI TERBATAS PADA KENDARAAN RODA TIGA. In: UNSPECIFIED.

Dr. I Ketut Adi Atmika, ST., MT., I Ketut Adi Atmika and I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA (2018) ANALISIS KINERJA TRAKSI KENDARAAN RODA TIGA DENGAN MODIFIKASI PROGRESI GEOMETRI BEBAS. In: UNSPECIFIED.

Dr. I Ketut Adi Atmika, ST., MT., I Ketut Adi Atmika and I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA (2018) Kajian Karakteristik Traksi Dan Kinerja Transmisi Standar Pada Kendaraan Roda Tiga. In: UNSPECIFIED.

I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and Dr. I Made Parwata, ST, MT, I MADE PARWATA and I Putu Lokantara, ST, MT, I PUTU LOKANTARA (2018) Karakteristik Permukaan Aus Baja Karbon Sedang Akibat Gesekan dengan Variasi Suhu Permukaan Kontak. In: UNSPECIFIED.

Dr. I Made Parwata, ST, MT, I MADE PARWATA and I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA (2018) LAJU KEAUSAN LAPISAN NIKEL TUNGSTEN DENGAN VARIASI PREHEATING SUBSTRAT. In: UNSPECIFIED.

I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and Dr. I Made Parwata, ST, MT, I MADE PARWATA and I Putu Lokantara, ST, MT, I PUTU LOKANTARA (2018) Kekerasan Hasil Pelapisan Thermal Spray Coating Ni-W pada Baja Karbon dengan Suhu Pre-Heating Substrate 600, 700 dan 800C. In: UNSPECIFIED.

Dr. I Made Parwata, ST, MT, I MADE PARWATA and I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA (2018) THE EFFECT OF SUBTRATE PREHEATING ON THE WEAR RATE OF THE NICKEL TUNGSTEN LAYER ON THE MEDIUM CARBON STEEL. In: UNSPECIFIED.

I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and Dr. I Made Parwata, ST, MT, I MADE PARWATA and I Putu Lokantara, ST, MT, I PUTU LOKANTARA (2018) Wear of Ni-Cr Deposited on Carbon Steel in Friction Loading with Varying Surface Temperature. In: UNSPECIFIED.

I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and Ir. MADE SUARDA, M.Eng., MADE SUARDA and Dr. I Made Parwata, ST, MT, I MADE PARWATA (2017) Disain Mesin Pencuci Biji Kopi Fermentasi dengan Tiga Sudu Pengaduk Sejajar dan Bertingkat. In: UNSPECIFIED.

Dr. I Made Parwata, ST, MT, I MADE PARWATA and I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA (2017) KEKASARAN PERMUKAAN PADA BAJA KARBON SEDANG AKIBAT PERBEDAAN TEKANAN DAN SUDUT NOSEL DALAM PROSES SAND BLASTING. In: UNSPECIFIED.

Dr. I Made Parwata, ST, MT, I MADE PARWATA and I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA (2017) Ketahanan dan Mekanisme Aus Lapisan Nickel-Tungsten pada Baja Karbon Sedang Akibat Beban Gesek. In: UNSPECIFIED.

I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and I Putu Lokantara, ST, MT, I PUTU LOKANTARA and Dr. I Made Parwata, ST, MT, I MADE PARWATA (2017) Distribusi kekerasan material dibawah permukaan lapisan Ni-Cr pada baja karbon dengan variasi suhu pre-heating material inti dalam proses thermal coating. In: UNSPECIFIED.

I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and Dr. I Made Parwata, ST, MT, I MADE PARWATA and I Putu Lokantara, ST, MT, I PUTU LOKANTARA (2017) Hardness and Wear of Nickel-Tungsten Layers on Medium Carbon Steel under Rolling-Sliding Contact Test. In: UNSPECIFIED.

Dr. I Made Parwata, ST, MT, I MADE PARWATA and I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and I Putu Lokantara, ST, MT, I PUTU LOKANTARA (2016) PERILAKU MATERIAL DIBAWAH PERMUKAAN KONTAK DENGAN VARIASI TEBAL MATERIAL PELAPIS AKIBAT BEBAN GESEK. In: UNSPECIFIED.

I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and Dr. I Made Parwata, ST, MT, I MADE PARWATA and I Putu Lokantara, ST, MT, I PUTU LOKANTARA (2016) Ketahanan Aus Lapisan NiCr pada Baja Karbon Sedang dengan Metode Pelapisan Powder Flame Spray Coating. In: UNSPECIFIED.

Dr. I Made Parwata, ST, MT, I MADE PARWATA and I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and I Putu Lokantara, ST, MT, I PUTU LOKANTARA (2016) Simulasi Unjuk Kerja Profil Roda Kereta Api Ores 1002 dengan Modifikasi Radius Flens Roda. In: UNSPECIFIED.

I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and Prof. Dr. Tjokorda Gde Tirta Nindhia, ST, MT, TJOKORDA GDE TIRTA NINDHIA and I Putu Lokantara, ST, MT, I PUTU LOKANTARA and Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA (2013) KETAHANAN AUS BAJA CARBON AISI 1065 DENGAN PENGERASAN PERMUKAAN KONTAK (QUENCH-HARDENING) TERHADAP BEBAN GELINDING-LUNCUR. In: UNSPECIFIED.

Dr. I Made Parwata, ST, MT, I MADE PARWATA and I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and I Putu Lokantara, ST, MT, I PUTU LOKANTARA (2016) Karakteristik Lapisan Nikel Kromium Akibat Perbedaan Sudut Nosel Pada Pelapisan Baja ST60. In: UNSPECIFIED.

I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and Prof. Dr. Tjokorda Gde Tirta Nindhia, ST, MT, TJOKORDA GDE TIRTA NINDHIA (2013) Keausan cylinder liner blok mesin kendaraan roda dua akibat beban kontak ring piston. In: UNSPECIFIED.

I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and Dr. I Made Parwata, ST, MT, I MADE PARWATA and Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and I Putu Lokantara, ST, MT, I PUTU LOKANTARA (2014) Mekanisme Aus Baja Karbon (C0.65) Akibat Beban Kontak Gelinding-Luncur Dua Arah Berlawanan. In: UNSPECIFIED.

I MADE ASTIKA, ST, M.Erg, MT, I MADE ASTIKA and Prof. Dr. Tjokorda Gde Tirta Nindhia, ST, MT, TJOKORDA GDE TIRTA NINDHIA and I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and I Gusti Komang Dwijana, ST, M.T, I GUSTI KOMANG DWIJANA (2013) Strain Hardening Baja Karbon AISI 1065 Akibat Beban Gelinding Gesek. In: UNSPECIFIED.