Items where Author is "Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA"

Group by: Item Type | No Grouping

Jump to: Article | Conference or Workshop Item | Book

Number of items: 56.

Article

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2020) OPTIMIZATION ON THE MATERIAL PROPERTIES PREDICTION OF STEELS USING INSTRUMENTED INDENTATION. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) , 10 (3). ISSN 2249-6890, 2249-8001

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Dra. Ni Luh Watiniasih, M.Sc., Ph.D., NI LUH WATINIASIH and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2020) Evaluation of Strain Hardening Exponent through Indentation Size Effect (ISE) of Vickers Hardness. INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY (IJET), 12 (2). ISSN 2319-8613, 09754024

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and I MADE ASTIKA, ST, M.Erg, MT, I MADE ASTIKA and I WAYAN WIDHIADA, ST., M.Sc, Ph.D, I WAYAN WIDHIADA (2019) DETERMINING PLASTIC PROPERTIES OF MATERIAL THROUGH INSTRUMENTED INDENTATION APPROACH. International Journal of Mechanical Engineering and Technology (IJMET), 10 (1). ISSN 09766480, 09766499

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Dr. Ir. Agus Dharma, M.T., Agus Dharma and I Nyoman Karnata Mataram, ST.,MT, I NYOMAN KARNATA MATARAM (2018) Determination Plastic Properties of a Material by Spherical Indentation Base on the Representative Stress Approach. Journal of Physics-Conference Series, 989 (1). ISSN 17426588, 17426596

Dr. Ir. Agus Dharma, M.T., Agus Dharma and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Dra. Ni Luh Watiniasih, M.Sc., Ph.D., NI LUH WATINIASIH and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2018) No Cost Low Cost Compressed Air System Optimization in Industry. Journal of Physics Conference Series, 989 (1). ISSN 17426588, 17426596

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Dr. Ir. I Gusti Ngurah Nitya Santhiarsa, MT, I GUSTI NGURAH NITYA SANTHIARSA (2018) Pengaruh Variasi Ketebalan(Thickness)Terhadap Sifat Mekanik Material Dasar dan Daerah Nugget Pada Hasil Pengelasan Titik (Spot Welding) Baja Lembaran. Jurnal Ilmiah Teknik Desain Mekanika, 7 (4). ISSN 2302 –5182

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2017) Strain Hardening Exponent Base Of Indentation Size Effect (ISE) Of Vickers Hardness. Journal of Materials Engineering and Processing Technology, 1 (2). ISSN 2549-6891

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Ir. Ngakan Putu Gede Suardana, MT, Ph.D., NGAKAN PUTU GEDE SUARDANA and Dr.Ir. I Kt Suarsana, MT., I Kt Suarsana (2017) PENGEMBANGAN POTENSI WISATA ALAM, BUDAYA LOKAL SERTA KULINER KHAS DI DESA NONGAN KARANGASEM BALI. Buletin Udayana Mengabdi, 16 (2). ISSN 1412-0925

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2017) Evaluation of Strength Spot Welding Through the use of Finite Element Modeling Indentation Approach. JOURNAL OF MATERIAL ENGINEERING AND PROCESSING TECHNOLOGY (JMEPT), 1 (1). ISSN 2549-6891

Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA (2017) Characterising and Predicting on The Mechanical Behaviour of Dissimilar Spot Welded Joints Base on Dual Indenters. International Journal of Materials, Mechanics and Manufacturing (IJMMM) , 5 (4). ISSN 1793-8198

Prof. I DEWA GEDE ARY SUBAGIA, S.T., M.T., Ph.D , I DEWA GEDE ARY SUBAGIA and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA (2017) KEKERASAN DAN TEGANGAN TARIK LASAN BAJA ST-37 PADA POSISI VERTIKAL DAN HORIZONTAL. Jurnal Ilmiah Teknik Desain Mekanika, 6 (1). ISSN 2302-5182

Prof. I DEWA GEDE ARY SUBAGIA, S.T., M.T., Ph.D , I DEWA GEDE ARY SUBAGIA and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA (2017) Kekuatan Tarik Dan Kekerasan Sambungan Las Baja ST 37 Dengan Menggunakan Variasi Elektroda. Jurnal Ilmiah Teknik Desain Mekanika, 6 (1). ISSN 2302-5182

Prof. I DEWA GEDE ARY SUBAGIA, S.T., M.T., Ph.D , I DEWA GEDE ARY SUBAGIA and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA (2017) Studi Penentuan Titik Kritis Bejana Tekan Reaktor Pwr Terhadap Kombinasi Temperatur dan Tekanan. Jurnal Ilmiah Teknik Desain Mekanika, 6 (1). ISSN 2302-5182

Prof. Ir. Ngakan Putu Gede Suardana, MT, Ph.D., NGAKAN PUTU GEDE SUARDANA and Drs. I Wayan Yogi Swara, M.S., I Wayan Yogi Swara and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA (2016) Pemetaan Potensi Wisata Alam di Desa Batumadeg Kecamatan Nusa Penida Kabupaten Klungkung Bali. Jurnal Pengabdian Kepada Masyarakat Udayana Mengabdi, 13 (3). ISSN 14120925

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA (2016) Strength Based Numerical Approach Constitutive Material Prediction of Spot Welded Joints of Steel. Jurnal KnE Energy, 2016 (1). ISSN 2413-5453

Prof. Ir. I Gusti Bagus Wijaya Kusuma, Ph.D., I GUSTI BAGUS WIJAYA KUSUMA and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA (2016) PENGARUH LGV TERHADAP PERFORMA DAN EMISI GAS BUANG PADA MOBIL TRANSMISI MANUAL. JURNAL METTEK, 2 (1). ISSN 2502-3829

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA (2016) Prediksi Kurva P-h dan Nilai Kekerasan pada Indentasi Bulat Berbasis Pendekatan Tegangan Representatif (dr). Jurnal Energi Dan Manufaktur (JEM), 9 (1). ISSN 2302-5255

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA (2015) Hardness Prediction Based On P-h Curves And Inverse Material Parameters Estimation. Applied Mechanics and Materials, 776 (2 (1). ISSN 16609336

I WAYAN WIDHIADA, ST., M.Sc, Ph.D, I WAYAN WIDHIADA and Prof. Dr. Tjokorda Gde Tirta Nindhia, ST, MT, TJOKORDA GDE TIRTA NINDHIA and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA (2015) Robust Control for the Motion Five Fingered Robot Gripper. International Journal of Mechanical Engineering and Robotics Research, 4 (3). ISSN 2278-0149

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA (2015) Work Position Effects On Physiological Aspects Of Machining Workers. Management Information and Educational Engineering, 1 (1). ISSN -

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. I DEWA GEDE ARY SUBAGIA, S.T., M.T., Ph.D , I DEWA GEDE ARY SUBAGIA and I WAYAN WIDHIADA, ST., M.Sc, Ph.D, I WAYAN WIDHIADA and Prof. Ir. Ngakan Putu Gede Suardana, MT, Ph.D., NGAKAN PUTU GEDE SUARDANA (2015) Characterization of Materials Parameters by Reverse Finite Element Modelling Based on Dual Indenters Vickers and Spherical Indentation. procedia manufacturing, 2 (1). ISSN 2351-9789

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA (2015) UJI VARIASI TEKANAN NOSEL TERHADAP KARAKTERISTIK SEMPROTAN BAHAN BAKAR BIODIESEL. JURNAL METTEK, 1 (2). ISSN 2502-3829

Prof. Ir. I Gusti Bagus Wijaya Kusuma, Ph.D., I GUSTI BAGUS WIJAYA KUSUMA and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA (2015) Uji Variasi Tekanan Nosel Terhadap Karakteristik Semprotan Bahan Bakar Biodiesel. JURNAL METTEK, 1 (2). ISSN 1412-XXXX

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA (2015) PENGEMBANGAN INDENTATION SIZE EFFECT (ISE) DALAM PENENTUAN KOEFISIEN PENGERASAN REGANG BAJA. Jurnal Energi Dan Manufaktur (JEM), 8 (2). ISSN 2302-5255

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA (2014) P-h Curves and Hardness Value Prediction for Spherical Indentation Based on the Representative Stress Approach. Applied Mechanics and Materials, 493 (1). ISSN 16609336

Conference or Workshop Item

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and I WAYAN WIDHIADA, ST., M.Sc, Ph.D, I WAYAN WIDHIADA and Dra. Ni Luh Watiniasih, M.Sc., Ph.D., NI LUH WATINIASIH (2020) Identification Plastic Properties of Spot Welded Joints Using the Instrumented Indentation Technique. In: UNSPECIFIED.

I WAYAN WIDHIADA, ST., M.Sc, Ph.D, I WAYAN WIDHIADA and Prof. Dr. Tjokorda Gde Tirta Nindhia, ST, MT, TJOKORDA GDE TIRTA NINDHIA and I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA (2020) Control of Bionic Robot Leg Performance with Proportional Integral and Derivative Controller. In: UNSPECIFIED.

I WAYAN WIDHIADA, ST., M.Sc, Ph.D, I WAYAN WIDHIADA and Prof. Dr. Tjokorda Gde Tirta Nindhia, ST, MT, TJOKORDA GDE TIRTA NINDHIA and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA (2020) Design of The Bionic Robot Hand with Electromyography Smart Sensor based on MATLAB/Simulink. In: UNSPECIFIED.

I WAYAN WIDHIADA, ST., M.Sc, Ph.D, I WAYAN WIDHIADA and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA (2019) Comparison of PID and fuzzy logic to control the motions of robotic prosthetic limbs. In: UNSPECIFIED.

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and I MADE ASTIKA, ST, M.Erg, MT, I MADE ASTIKA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA (2019) Optimization on strength spot welding joint trough finite element modelling indentation approach. In: UNSPECIFIED.

I WAYAN WIDHIADA, ST., M.Sc, Ph.D, I WAYAN WIDHIADA and Prof. Dr. Tjokorda Gde Tirta Nindhia, ST, MT, TJOKORDA GDE TIRTA NINDHIA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Ir. I Nengah Suarnadwipa, MT, I NENGAH SUARNADWIPA (2019) Temperature Stability and Humidity on Infant Incubator Based on Fuzzy Logic Control. In: UNSPECIFIED.

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA (2019) Indentation Size Effect of the Vickers Indentation to Improve the Accuracy of Inverse Materials Properties Modelling Based on Hardness Value. In: UNSPECIFIED.

I WAYAN WIDHIADA, ST., M.Sc, Ph.D, I WAYAN WIDHIADA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA (2019) The Robust PID Control System of Temperature Stability and Humidity on Infant Incubator Based on Arduino AT Mega 2560. In: UNSPECIFIED.

Dra. Ni Luh Watiniasih, M.Sc., Ph.D., NI LUH WATINIASIH and Prof. Dr. Ir. I Wayan Nuarsa, M.Si., I Wayan Nuarsa and Drh. I MADE MERDANA, MP., I MADE MERDANA and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Dr. Ir. Agus Dharma, M.T., Agus Dharma and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Dr.Dra. Meitini Wahyuni Proborini,M.Sc,St, MEITINI WAHYUNI PROBORINI (2019) Organism Associated with Cymodocea Serulata in Different Habitats near Urban Coastal Area. In: UNSPECIFIED.

I Nyoman Karnata Mataram, ST.,MT, I NYOMAN KARNATA MATARAM and Ir. ANAK AGUNG NGURAH AGUNG JAYA WIKRAMA, MT, ANAK AGUNG NGURAH AGUNG JAYA WIKRAMA and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2019) TRAFFIC MANAGEMENT FOR JALAN KAYU AYU IN SEMINYAK AREA, BADUNG REGENCY. In: UNSPECIFIED.

Dra. Ni Luh Watiniasih, M.Sc., Ph.D., NI LUH WATINIASIH and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2018) Epiphytic Biofilm on Halodule uninervis atTouristic area in Bali Island. In: UNSPECIFIED.

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Dra. Ni Luh Watiniasih, M.Sc., Ph.D., NI LUH WATINIASIH and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2018) Indentation size effect (ISE) for Vickers Indentation and potential uses to improve the accuracy of Material Properties Prediction. In: UNSPECIFIED.

I Komang Ari Mogi, S.Kom., M.Kom., I Komang Ari Mogi and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA (2018) Geographic Information System Development for Support Bunga Mekar as Tourism Village. In: UNSPECIFIED.

Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and I Made Dwi Budiana Penindra, M.MT, I MADE DWI BUDIANA PENINDRA (2018) Influence of Forming Parameter in Metal Gasket Manufacture by using Finite Element Method. In: UNSPECIFIED.

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and I WAYAN WIDHIADA, ST., M.Sc, Ph.D, I WAYAN WIDHIADA (2018) Potential Used Finite Element Indentation Modeling approach for Characterization strength and behavior Material in Non Standard Conditions. In: UNSPECIFIED.

Dr. Wayan Nata Septiadi, ST, MT, WAYAN NATA SEPTIADI and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA (2018) Sistem Pendingin Central Processing Unit (CPU) Berbasis Cascade Straight Heat Pipe. In: UNSPECIFIED.

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Dr.Ir. I Kt Suarsana, MT., I Kt Suarsana (2017) Pendekatan Ekperimental dan Numerik untuk Menentukan Sifat Plastic Material Terdeformasi Hasil Spot Welding Joint. In: UNSPECIFIED.

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Dr. Ir. Agus Dharma, M.T., Agus Dharma and I Nyoman Karnata Mataram, ST.,MT, I NYOMAN KARNATA MATARAM (2017) DETERMINATION PLASTIC PROPERTIES OF A MATERIAL BY SPHERICAL INDENTATION BASE ON THE REPRESENTATIVE STRESS APPROACH. In: UNSPECIFIED.

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2017) Penentuan Plastic Properties pada Material Hasil Las Spot Welding dengan Metode Elemen Hingga. In: UNSPECIFIED.

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Ir. Ngakan Putu Gede Suardana, MT, Ph.D., NGAKAN PUTU GEDE SUARDANA and Prof. I DEWA GEDE ARY SUBAGIA, S.T., M.T., Ph.D , I DEWA GEDE ARY SUBAGIA and Dr.Ir. I Kt Suarsana, MT., I Kt Suarsana (2016) Pemetaan dalam Rangka Pengembangan Potensi Wisata Alam, Budaya Lokal Serta Kuliner Khas di Desa Nongan Karangasem Bali. In: UNSPECIFIED.

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2016) Penyambungan Las Titik Material Tak Sejenis Baja Ringan dan Tahan Karat Sebagai Alternatif Body Kendaraan Sistem Transportasi Perkotaan Yang Ramah Lingkungan. In: UNSPECIFIED.

Dr. Ir. I Gusti Ngurah Nitya Santhiarsa, MT, I GUSTI NGURAH NITYA SANTHIARSA and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Dr.Ir. I Kt Suarsana, MT., I Kt Suarsana (2016) KARAKTERISASI SERAT IJUK DENGAN FOURIER TRANSFORM INFRARED DAN X RAY DIFFRACTION TEST. In: UNSPECIFIED.

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Prof. Ir. Ngakan Putu Gede Suardana, MT, Ph.D., NGAKAN PUTU GEDE SUARDANA and Dr. Ir. I Gusti Ngurah Nitya Santhiarsa, MT, I GUSTI NGURAH NITYA SANTHIARSA (2016) PENDEKATAN NUMERIK BERBASIS FINITE ELEMENT MODELING DALAM INVESTIGASI KEKUATAN SAMBUNGAN LAS TITIK (SPOT WELDING) UNTUK MATERIAL TAK SEJENIS (DISSIMILAR). In: UNSPECIFIED.

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA (2016) Work Position Effects On Physiological Aspects Of Machining Workers. In: UNSPECIFIED.

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2016) Pendekatan Inverse Material Konstitutive Dalam Prediksi Kekuatan Hasil Las Titik (Spot Welding). In: UNSPECIFIED.

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA (2016) STRENGTH BASED NUMERICAL APPROACH CONSTITUTIVE MATERIAL PREDICTION OF SPOT WELDED JOINTS OF STEEL. In: UNSPECIFIED.

Book

Prof. Dr. Ir. Komang Budaarsa, MS, KOMANG BUDAARSA and I Ketut Mangku Budiasa, S.Pt, M.Si, I Ketut Mangku Budiasa and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Dr. Ir. Agus Dharma, M.T., Agus Dharma and Dr. Nyoman Gunantara, ST, MT, NYOMAN GUNANTARA and Dr. I Made Sukewijaya, S.P., M.Sc., I MADE SUKEWIJAYA and Prof. Dr. Drh. I NYOMAN SUARSANA,M.Si, I Nyoman Suarsana (2017) Buku pedoman KKN Unud. Pertama ed. Swasta Nulus. ISBN 978-602-7599-43-7

This list was generated on Fri May 3 23:21:35 2024 WITA.

Export as	Atom RSS 1.0 RSS 2.0