Items where Author is "Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA"

Group by: Item Type | No Grouping

Jump to: Article | Conference or Workshop Item

Number of items: 54.

Article

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2020) OPTIMIZATION ON THE MATERIAL PROPERTIES PREDICTION OF STEELS USING INSTRUMENTED INDENTATION. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) , 10 (3). ISSN 2249-6890, 2249-8001

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Dra. Ni Luh Watiniasih, M.Sc., Ph.D., NI LUH WATINIASIH and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2020) Evaluation of Strain Hardening Exponent through Indentation Size Effect (ISE) of Vickers Hardness. INTERNATIONAL JOURNAL OF ENGINEERING AND TECHNOLOGY (IJET), 12 (2). ISSN 2319-8613, 09754024

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and I MADE ASTIKA, ST, M.Erg, MT, I MADE ASTIKA and I WAYAN WIDHIADA, ST., M.Sc, Ph.D, I WAYAN WIDHIADA (2019) DETERMINING PLASTIC PROPERTIES OF MATERIAL THROUGH INSTRUMENTED INDENTATION APPROACH. International Journal of Mechanical Engineering and Technology (IJMET), 10 (1). ISSN 09766480, 09766499

Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA (2018) APPLICATION OF SAND CASTING TO RECYCLE ALUMINIUM ALLOY FOR MOTORCYCLE BRAKE HANDLE. Key Engineering Materials, 705 (357-36). ISSN 1662-9795

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Dr. Ir. Agus Dharma, M.T., Agus Dharma and I Nyoman Karnata Mataram, ST.,MT, I NYOMAN KARNATA MATARAM (2018) Determination Plastic Properties of a Material by Spherical Indentation Base on the Representative Stress Approach. Journal of Physics-Conference Series, 989 (1). ISSN 17426588, 17426596

Dr. Nyoman Gunantara, ST, MT, NYOMAN GUNANTARA and Ir. Pande Ketut Sudiarta, M.Erg, PANDE KETUT SUDIARTA and Dr. Ir. Agus Dharma, M.T., Agus Dharma and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2018) Measurements of the Received Signal Level and Service Coverage Area at the IEEE 802.11 Access Point in the Building. Journal of Physics: Conference Series, 989 (-). ISSN 17426596

Dr. Ir. Agus Dharma, M.T., Agus Dharma and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Dra. Ni Luh Watiniasih, M.Sc., Ph.D., NI LUH WATINIASIH and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2018) No Cost Low Cost Compressed Air System Optimization in Industry. Journal of Physics Conference Series, 989 (1). ISSN 17426588, 17426596

Dr. Nyoman Gunantara, ST, MT, NYOMAN GUNANTARA and Ir. Pande Ketut Sudiarta, M.Erg, PANDE KETUT SUDIARTA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2018) Multi-Criteria Weights on Ad Hoc Networks Using Particle Swarm Optimization for Optimal Path Pairs. International Review of Electrical Engineering (I.R.E.E.), 13 (1). ISSN 1827- 6660

Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2018) Proses Pembentukan Gasket berlapis dengan Metode Elemen Hingga. Jurnal Energi Dan Manufaktur (JEM), 11 (2). ISSN 2302-5255

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2017) Strain Hardening Exponent Base Of Indentation Size Effect (ISE) Of Vickers Hardness. Journal of Materials Engineering and Processing Technology, 1 (2). ISSN 2549-6891

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2017) Evaluation of Strength Spot Welding Through the use of Finite Element Modeling Indentation Approach. JOURNAL OF MATERIAL ENGINEERING AND PROCESSING TECHNOLOGY (JMEPT), 1 (1). ISSN 2549-6891

Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA (2017) Characterising and Predicting on The Mechanical Behaviour of Dissimilar Spot Welded Joints Base on Dual Indenters. International Journal of Materials, Mechanics and Manufacturing (IJMMM) , 5 (4). ISSN 1793-8198

Ir. Anak Agung Adhi Suryawan, MT, ANAK AGUNG ADHI SURYAWAN and Ir. I Nengah Suweden, MT, I NENGAH SUWEDEN and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Ir. I GUSTI NGURAH OKA SUPUTRA, MT, I GUSTI NGURAH OKA SUPUTRA (2016) IMPLEMENTASI RODA GIGI CACING PADA ALAT PEMBENTUK MOTIF PADA KERAJINAN PLAT SENG. Jurnal Udayana Mengabdi, 15 (2). ISSN 1412-0925

Conference or Workshop Item

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and I WAYAN WIDHIADA, ST., M.Sc, Ph.D, I WAYAN WIDHIADA and Dra. Ni Luh Watiniasih, M.Sc., Ph.D., NI LUH WATINIASIH (2020) Identification Plastic Properties of Spot Welded Joints Using the Instrumented Indentation Technique. In: UNSPECIFIED.

Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and I Made Dwi Budiana Penindra, M.MT, I MADE DWI BUDIANA PENINDRA (2019) Influence of dies type for gasket forming shape. In: UNSPECIFIED.

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and I MADE ASTIKA, ST, M.Erg, MT, I MADE ASTIKA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA (2019) Optimization on strength spot welding joint trough finite element modelling indentation approach. In: UNSPECIFIED.

Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2019) The metal gasket sealing performance of bolted flanged with fem analysis. In: UNSPECIFIED.

Dra. Ni Luh Watiniasih, M.Sc., Ph.D., NI LUH WATINIASIH and I GEDE HERRY PURNAMA, ST., MT.MIDEA, I GEDE HERRY PURNAMA and Drh. I MADE MERDANA, MP., I MADE MERDANA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2019) Managing laundry wastewater. In: UNSPECIFIED.

I WAYAN WIDHIADA, ST., M.Sc, Ph.D, I WAYAN WIDHIADA and Prof. Dr. Tjokorda Gde Tirta Nindhia, ST, MT, TJOKORDA GDE TIRTA NINDHIA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Ir. I Nengah Suarnadwipa, MT, I NENGAH SUARNADWIPA (2019) Temperature Stability and Humidity on Infant Incubator Based on Fuzzy Logic Control. In: UNSPECIFIED.

Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2019) Gasket Process Parameter in Metal Forming. In: UNSPECIFIED.

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA (2019) Indentation Size Effect of the Vickers Indentation to Improve the Accuracy of Inverse Materials Properties Modelling Based on Hardness Value. In: UNSPECIFIED.

I WAYAN WIDHIADA, ST., M.Sc, Ph.D, I WAYAN WIDHIADA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA (2019) The Robust PID Control System of Temperature Stability and Humidity on Infant Incubator Based on Arduino AT Mega 2560. In: UNSPECIFIED.

Dra. Ni Luh Watiniasih, M.Sc., Ph.D., NI LUH WATINIASIH and Prof. Dr. Ir. I Wayan Nuarsa, M.Si., I Wayan Nuarsa and Drh. I MADE MERDANA, MP., I MADE MERDANA and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Dr. Ir. Agus Dharma, M.T., Agus Dharma and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Dr.Dra. Meitini Wahyuni Proborini,M.Sc,St, MEITINI WAHYUNI PROBORINI (2019) Organism Associated with Cymodocea Serulata in Different Habitats near Urban Coastal Area. In: UNSPECIFIED.

AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and Dr. Ir. I Ketut Gede Sugita, MT, I KETUT GEDE SUGITA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2019) Analysis of daily driving and its impact to the fuel economy of plug-in hybrid electric vehicles. In: UNSPECIFIED.

I Made Widiyarta, ST, M.Sc, Ph.D, I MADE WIDIYARTA and AINUL GHURRI, ST,MT,Ph.D., AINUL GHURRI and Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Dr. Ir. I Ketut Gede Sugita, MT, I KETUT GEDE SUGITA (2019) Analysis on fuel economy and CO2 emission of gasoline engine and hybrid electric vehicles. In: UNSPECIFIED.

Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2019) Contact Width and Contact Stress Evaluation of Three-Layer Metal Gasket. In: UNSPECIFIED.

Dr. Eng. Ni Nyoman Pujianiki, ST, MT, M.Eng, NI NYOMAN PUJIANIKI and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Prof. Dr. Ir. I Gede Rai Maya Temaja, M.P., I GEDE RAI MAYA TEMAJA (2019) Monitoring ground surface displacements induced by volcanic activity of Mount Agung using SBAS-DInSAR. In: UNSPECIFIED.

I Nyoman Karnata Mataram, ST.,MT, I NYOMAN KARNATA MATARAM and Ir. ANAK AGUNG NGURAH AGUNG JAYA WIKRAMA, MT, ANAK AGUNG NGURAH AGUNG JAYA WIKRAMA and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2019) TRAFFIC MANAGEMENT FOR JALAN KAYU AYU IN SEMINYAK AREA, BADUNG REGENCY. In: UNSPECIFIED.

Dra. Ni Luh Watiniasih, M.Sc., Ph.D., NI LUH WATINIASIH and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2018) Epiphytic Biofilm on Halodule uninervis atTouristic area in Bali Island. In: UNSPECIFIED.

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Dra. Ni Luh Watiniasih, M.Sc., Ph.D., NI LUH WATINIASIH and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2018) Indentation size effect (ISE) for Vickers Indentation and potential uses to improve the accuracy of Material Properties Prediction. In: UNSPECIFIED.

Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2018) Forming Shape Gasket Three-Layer dengan Metode Elemen Hingga. In: UNSPECIFIED.

Dra. Ni Luh Watiniasih, M.Sc., Ph.D., NI LUH WATINIASIH and Drh. I MADE MERDANA, MP., I MADE MERDANA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2018) Layout Guide for Burnt and Un-burnt Tropical Forest. The Diversity of Forest Plants and Insetcs for Sustainable Environmental. In: UNSPECIFIED.

Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2018) Comparative analysis in The Metal Gasket Sealing Performance. In: UNSPECIFIED.

Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2018) DESIGN OF FORMING PARAMETERS FOR CORRUGATED METAL GASKET PRODUCT. In: UNSPECIFIED.

Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2018) FEM Analysis of Three layer metal gasket. In: UNSPECIFIED.

Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2018) Gasket Performance for different type of flange. In: UNSPECIFIED.

Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and I Made Dwi Budiana Penindra, M.MT, I MADE DWI BUDIANA PENINDRA (2018) Gasket forming shape for different type of flanges. In: UNSPECIFIED.

Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and I Made Dwi Budiana Penindra, M.MT, I MADE DWI BUDIANA PENINDRA (2018) Influence of Forming Parameter in Metal Gasket Manufacture by using Finite Element Method. In: UNSPECIFIED.

Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2018) Pengembangan gasket 3 lapis tipe corrugated. In: UNSPECIFIED.

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and I WAYAN WIDHIADA, ST., M.Sc, Ph.D, I WAYAN WIDHIADA (2018) Potential Used Finite Element Indentation Modeling approach for Characterization strength and behavior Material in Non Standard Conditions. In: UNSPECIFIED.

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Dr. Ir. Agus Dharma, M.T., Agus Dharma and I Nyoman Karnata Mataram, ST.,MT, I NYOMAN KARNATA MATARAM (2017) DETERMINATION PLASTIC PROPERTIES OF A MATERIAL BY SPHERICAL INDENTATION BASE ON THE REPRESENTATIVE STRESS APPROACH. In: UNSPECIFIED.

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2017) Penentuan Plastic Properties pada Material Hasil Las Spot Welding dengan Metode Elemen Hingga. In: UNSPECIFIED.

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2016) Penyambungan Las Titik Material Tak Sejenis Baja Ringan dan Tahan Karat Sebagai Alternatif Body Kendaraan Sistem Transportasi Perkotaan Yang Ramah Lingkungan. In: UNSPECIFIED.

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Prof. Ir. Ngakan Putu Gede Suardana, MT, Ph.D., NGAKAN PUTU GEDE SUARDANA and Dr. Ir. I Gusti Ngurah Nitya Santhiarsa, MT, I GUSTI NGURAH NITYA SANTHIARSA (2016) PENDEKATAN NUMERIK BERBASIS FINITE ELEMENT MODELING DALAM INVESTIGASI KEKUATAN SAMBUNGAN LAS TITIK (SPOT WELDING) UNTUK MATERIAL TAK SEJENIS (DISSIMILAR). In: UNSPECIFIED.

Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA and Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and I Made Dwi Budiana Penindra, M.MT, I MADE DWI BUDIANA PENINDRA (2015) Morphological analyses and crystalline structures of anodic TiO2 thin film on Ti6Al4V alloy using phosphate and calcium containing electrolyte under different voltage and calcium molarity. In: UNSPECIFIED.

Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2013) Sifat mekanik dan struktur mikro paduan cu-sn bahan genta dengan metode investment casting. In: UNSPECIFIED.

Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2013) PENGARUH TEMPERATUR TUANG PADUAN PERUNGGU TERHADAP SIFAT KEKERASANNYA PADA PROSES PEMBUATAN GENTA DENGAN METODA PASIR CETAK (SAND CASTING). In: UNSPECIFIED.

Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2012) Perubahan Kekuatan Impact Paduan Cu-Sn pada Proses Pengecoran Genta dengan Bahan Refractory yang Berbeda. In: UNSPECIFIED.

Dr.Eng. I Made Gatot Karohika, ST, MT, I MADE GATOT KAROHIKA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2011) PENGARUH BAHAN DAN SUHU PREHEATING CETAKAN TERHADAP KEKERASAN DAN STRUKTUR MIKRO PERUNGGU PADA PROSES PEMBUATAN GENTA DENGAN METODE INVESTMENT CASTING. In: UNSPECIFIED.

Ir. I Nyoman Budiarsa, M.T., Ph.D., I NYOMAN BUDIARSA and Prof. Dr. Ir. I Nyoman Gde Antara, M.Eng, I NYOMAN GDE ANTARA (2016) Pendekatan Inverse Material Konstitutive Dalam Prediksi Kekuatan Hasil Las Titik (Spot Welding). In: UNSPECIFIED.

This list was generated on Sun Apr 28 08:52:09 2024 WITA.

Export as	Atom RSS 1.0 RSS 2.0